Fall Harvest Sale – Ends 11/08/24! Call or chat today! Large Project? Request a Quote.
  • VaporShield MVB - 3 Gallon Kit

VaporShield MVB - 3 Gallon Kit

VaporShield MVP - Moisture Vapor Barrier VaporShield MVP 3 Gallon Kit can be used as a single primer coat negative-side moisture vapor barrier suitable for various types of concrete. The low-viscosity formula promotes deeper conc ...
  • $307.14

Available Options

VaporShield MVP - Moisture Vapor Barrier

VaporShield MVP 3 Gallon Kit can be used as a single primer coat negative-side moisture vapor barrier suitable for various types of concrete. The low-viscosity formula promotes deeper concrete penetration for superior substrate adhesion and offers better sealing and moisture-blocking performance than standard epoxy flooring products. It is intended for use when high moisture levels are present in concrete, which may cause bond failure with moisture-sensitive flooring systems, including impervious and semi-pervious options such as epoxy, polyaspartic, polyurethane, carpet, vinyl tiles, tile, wood floors, and more.

VaporShield MVP meets or exceeds ASTM F3010 standards for two-component resin-based membrane-forming moisture mitigation systems for use under resilient floor coverings. It is VOC-compliant in all states and provinces across North America.

  • VaporShield MVP-F (Fast Set)
  • VaporShield MVP-S (Standard Set)


Typical Use

  • Moisture Mitigation Negative-Side Moisture Barrier
  • Can be Used Instead of a Primer for Most Systems
  • Can Be Applied to New Concrete (28 Days or Older)
  • Meets ASTM F3010 for Resilient Floor Coverings
  • Ideal for Concrete Following ACI 302.2R Guidelines
  • Can Be Applied to Existing Concrete Not Meeting ACI 302.2R Standards

Benefits

  • Complies with USDA, FDA, and Food Safety Modernization Act
  • Slip Resistance (ADA). See Spartan Epoxies Technical Bulletin: 4
  • Meets LEED® and Green Seal® Standards
  • 100% Solids, Zero VOC, EPA-Compliant, Low Odor Installation
  • Strong and Durable Floor with Excellent Chemical and Abrasion Resistance
  • Designed for New Floors or Resurfacing Old Floors
  • Working Temperature: 60°F to 90°F (16°C to 32°C)
  • Color Variation Possible; Always “Box” Different Batches to Avoid Inconsistency

Colors

  • Clear Amber

Coverage Rate

100 sq. ft. (9.3 sq. m.) at 16 mils (0.41 mm) Wet Film Thickness (WFT)

Concrete Preparation

Concrete must be structurally sound and free from curing agents, coatings, sealers, densifiers, or other bond breakers.

New Concrete:

  • Must follow ACI 302.2R Guide for Concrete Slabs
  • Water-cement ratio: 0.4 to 0.5, approximately 4,000 psi (28 MPa) strength
  • A positive-side moisture barrier must meet ASTM E1745 standards

Existing Concrete:

  • If contaminants interfere with bonding, speak with your Spartan Expert
  • Contaminants may include silicates, hydrocarbons, calcium chlorides, and more
  • Refer to ACI 201.2R Guide for Durable Concrete for further details
  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over VaporShield MVB - 3 Gallon Kit

Total Reviews (0)
click here write review to add review for this product.