E-TEX98 - Kevlar Enhanced Epoxy Coating
-
$0.00
Videos and Instructions
FREQUENTLY ASKED QUESTIONS
Large Project? Get a Quote Here
E-TEX98 is a 98% solids heavy duty non-slip coating for applications in slippery or wet areas to prevent slips and falls from pedestrian and rolling equipment traffic. This product was developed for use in industrial environments and incorporates epoxy resins modified with Kevlar to provide toughness, excellent chemical resistance, wear, corrosion resistance and excellent slip resistance performance. A primer is optional but recommended - HDWB. Top coat is not normally required unless special situation.
Recommended for skidproofing industrial areas or docks in heavy pedestrian or normal rolling equipment areas.
RECOMMENDED FILM THICKNESS: 50-60 mils (average)
COVERAGE PER GALLON: Typical coverage is 30 square feet per gallon when applied with a phenolic core roller applicator.
Cure Schedule: 70 degrees:
Pot Life - 150 grams mass: 50 to 80 mins
Theoretical pot life (1 gallon): 60 mins
Tack Free (dry to touch): 5 to 8 hours
Light Foot Traffic: 24 hours
Full Cure: 72 Hours
Application Temperature:
50-90°F with relative humidity below 90% for best results.