TC92 - High Wear Urethane

TC92 is a three component aliphatic urethane floor finish that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, and some

chemical exposure areas.

Coverage:

600 square feet per gallon. Available in a 1/4 gallon kit, 1 gallon kit, and a 4 gallon kit. 660 sq ft per gallon if you purchase our pigment packs. 

High Solids High Wear Urethane

• Excellent chemical, abrasion resistance

• Excellent Flexibility

• Excellent UV and Weathering Stability

• Semi-Gloss / Eggshell Finish (Semi-gloss/eggshell (typical gloss is 20-40 @ 60 degrees)

• Clear and Pigmented

Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas.

LIMITATIONS:
• Colors or gloss may be affected by high humidity, low temperatures, chemical exposure, or exposure to lighting such as sodium vapor lights.
• For best results use a high quality 3/8” nap roller.
• Slab on grade requires moisture barrier
• Substrate temperature must be 5°F above dew point
• All new concrete must be cured for at least 30 days
• Physical properties are typical values and not specifications
• Light or bright colors (white, safety yellow, etc.) may require multiple coats or a suitable color coordinated primer to achieve a satisfactory hide.
• Tire contact may cause staining and discoloration
• Colors may vary from batch to batch, therefore, use only product from the same batch for an entire job.

CURE SCHEDULE: (70°F)