WBG - Top Coat - Quart / Sample Kit

High Gloss WBG Top Coat - Quart / Sample Kit. This kit will cover 80 to 125 sq ft per @ 3-5 mils wet thickness.

SPE-WBG - Water based High Gloss Top Coat 2 part Polyurethane excellent Resistance to chemicals and abrasions. 

SPE-WBG is a HIGH PERFORMANCE (water based) URETHANE  that is a two-component high-gloss aliphatic polyurethane water-based floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.

Recommended for auto service centers, warehouses, basement floors, garage floors, computer rooms, laboratories, aircraft hangers, cafeterias, and chemical exposure areas.

LIMITATIONS:

* After the product is mixed, air contact may cause the material to skim off if left uncovered. See reverse under application instructions. 

* Colors or gloss may be affected by high humidity, low temperatures, or chemical exposure. 

* For best results use a high quality 3/8”nap roller.

* Slab on grade requires moisture barrier.

* Substrate temperature must be 5°F above dew point.

* All new concrete must be cured for at least 30 days.

* Physical properties are typical values and not specifications.

* Tire contact may cause staining and discoloration.

* Slight appearances in gloss may vary from batch to batch, therefore, use only product from same batch for an entire job.

* Lights like sodium vapor lights can cause discoloring.

* Always request a sample and apply a suitable test to determine suitability and performance requirements before using.

CURE SCHEDULE: (70°F)
pot life – (150 gram mass)……………... Minimum 1 hour
tack free (dry to touch)………………...… 7-9 hours
recoat or topcoat.....…………….……...... 8-12 hours
light foot traffic...…………………………… 24 hours
full cure (heavy traffic)... ……………..… 3-5 days