CLEAR100LV - 3 Gallon Kit
-
$291.88
- $364.85
Videos and Instructions
FREQUENTLY ASKED QUESTIONS
Large Project? Get a Quote Here
CLEAR100LV is strategically designed for versatile implementation across a spectrum of environments. It serves as a resilient, transparent coating in high-traffic areas and facilitates the creation of intricate decorative flooring. The epoxy formulation is especially suitable when a substantial, transparent layer is required or when a visually captivating floor is desired, adorned with diverse aggregates like broadcasting vinyl flakes, quartz, micas, and marble chips. These additives offer an expansive range of design options, color variations, and thematic possibilities. Environments such as warehouses, kitchens, restrooms, and analogous spaces benefit from these attributes.
Recommended For:
Recommended for warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired.
Coverage Per Gallon:
90-133 square feet per gallon at 12-18 mils thickness.
Primer:
Recommended HDWB clear for more porous substrates to eliminate possible air release problems.
Topcoat:
Optional– HPU aliphatic urethanes or successive coats or CLEAR100LV in aggregate filled systems, with or without a clear urethane topcoat.
Application Temperature:
50-90 degrees F
Benefits:
- Unparalleled Durability
- Custom Aesthetic
- Abrasion Resistance
- Versatile Application
- Chemical Resilience
- Quick Application
Limitations:
- Color stability or gloss may be affected by environmental conditions such as high humidity, chemical exposure, UV exposure, or lighting such as sodium vapor lights.
- Colors may vary from batch to batch. Therefore, use only product from the same batch for an entire job.
- This product is not UV color stable. Clear aliphatic urethane topcoats reduce (UV light) color changes.
- Substrate temperature must be 5°F above dew point.
- For best results, apply with a ¼” nap roller.
- All new concrete must be cured for at least 30 days prior to application.
- Apply a suitable primer before using this product when necessary.
Cure Schedule:
- Pot Life (1 1/2 gallon volume): 15-25 minutes @ 70°F
- Tack Free (Dry to Touch): 4-8 hours @ 70°F
- Recoat or Topcoat: 10-12 hours @ 70°F
- Light Foot Traffic: 14-18 hours @ 70°F
- Full Cure (Heavy Traffic): 2-7 days @ 70°F
Technical Specifications:
- Solids by Weight: 97% (+/- 1%)
- Solids by Volume: 96% (+/- 1%)
- Volatile Organic Content: Less than 0.25 pounds per gallon mixed
- Standard Colors: Clear – Gardner color 2
- Recommended Film Thickness: 12-18 mils
- Coverage Per Gallon: 90-133 square feet per gallon @ 12-18 mils
- Packaging Information: 3 gallon kits (volume approximate), 15 gallon kits (volume approximate)
- Mix Ratio: 8.65 pounds part A to 4.10 pounds part B (2 parts A to 1 part B) (weights and volumes approximate)
- Shelf Life: 1 year in unopened containers
- Finish Characteristics: Gloss (>70 @ 60 degrees)
- Abrasion Resistance: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 37 mg loss
- Flexural Strength: 14,100 psi @ ASTM D790
- Compressive Strength: 13,200 psi @ ASTM D695
- Adhesion: 380 psi @ elcometer (concrete failure, no delamination)
- Viscosity: Mixed = 450-800 cps (typical)
- DOT Classifications: Part A “not regulated”, Part B “CORROSIVE LIQUID N.O.S., 8, UNI1760, PGIII”
- Tensile Strength: 8,700 psi @ ASTM D638
- Ultimate Elongation: 3.0%
- Gardner Variable Impactor: 50 inch pounds direct – passed
- Hardness: Shore D = 85
Chemical Resistance:
| Reagent | Rating |
|---|---|
| butanol | C |
| xylene | B |
| 1, 1, 1 trichloroethane | B |
| MEK | A |
| methanol | A |
| ethyl alcohol | C |
| skydrol | A |
| 10% sodium hydroxide |