XC75 Polyaspartic Coating

XC75 is a premium-grade polyaspartic coating engineered for maximum durability and long-term surface protection. Featuring an extended pot life, it allows for controlled application and rapid curing, providing an abrasion-resistant, UV-stable, and high-gloss finish suitable for high-performance environments. XC75 is optimized for demanding applications across various commercial and industrial settings, including garages, warehouses, laboratories, chemical processing facilities, and food-grade facilities. Its advanced formulation ensures resistance to weathering, impact, and heavy foot or vehicle traffic, making XC75 an optimal solution for professionals seeking resilient, enduring surface coatings. 

Color: Clear, however XC75 can be tinted using our Fierce Series Universal Pigments purchased here. 

Coverage Rate Per Gallon: 150 ft² @ 8 mils to 100ft² @ 10 mils. 

When applying  only one coat over full broadcasted flake: 

Before application to create a smoother finish, hoan flakes down using a swing buffer with 120 grit screen. Careful, if hoaned too smooth the finish could become slippery.

RECOMMENDED FOR:

XC75 is recommended for use in garages, workshops, warehouses, distribution centers, laboratories, chemical processing facilities, food-grade environments, and cold storage areas, where its durability, chemical resistance, and UV stability provide long-lasting floor protection.

CURE SCHEDULE: (50°F to 90°F)

Pot Life – (150 gram mass): 40 - 50 mins
Tack Free (dry to touch): 1-2 hours
Recoat: 1-10 hours
Light Foot Traffic: 4 - 6 hours
Full Cure: 5 - 7 days 

APPLICATION TEMPERATURE: 
50-90 degrees F with relative humidity below 85% 

SOLIDS BY VOLUME: 75% (+/-1%) ASTM D2367
HARDNESS: Shore D= 65 @ ASTM D2240
KONIG HARDNESS: 160 @ ASTM D4366
COLORS AVAILABLE: Clear – gardner color 1
RECOMMENDED FILM THICKNESS: 8-10 mils wet.
COVERAGE PER GALLON: 100-150 square feet per gallon.
PACKAGING INFORMATION: 2 gallon kit (net approximately) and available in 10 gallon kits
MIX RATIO: One to one by volume
SHELF LIFE: 6 months in unopened containers
FINISH CHARACTERISTICS: Gloss (>70 at 60 degrees
COMPRESSIVE STRENGTH: 7,000 psi @ ASTM D695
TENSILE STRENGTH: 3,900 psi @ ASTM D638
ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 7 mg loss @ ASTM D4060
DOT CLASSIFICATIONS:
Part A “FLAMMABLE LIQUID N.O.S., 3, UN1993, PGIII”
Part B “FLAMMABLE LIQUID N.O.S., 3, UN1993, PGIII”