VersaTEK - Industrial Grade High-Gloss Urethane
VERSATEK is an industrial-grade, 2 component, high-gloss
protective urethane designed to be applied directly over properly
prepared bare concrete, cement-based overlays, and an array of
Spartan Epoxies coating systems. With a 43% solids content an ...
-
$0.00
Available Options
VIDEO AND INSTRUCTIONS
Videos and Instructions
EXPERT HELP
FREQUENTLY ASKED QUESTIONS
DURABLE
Large Project? Get a Quote Here
VERSATEK is an industrial-grade, 2 component, high-gloss
protective urethane designed to be applied directly over properly
prepared bare concrete, cement-based overlays, and an array of
Spartan Epoxies coating systems. With a 43% solids content and a
2:1 mix ratio, this product offers exceptional durability and UV
stability for both indoor and outdoor environments. It is stain-
resistant, color-tintable, making it ideal for decorative concrete
surfaces in commercial, retail, and high-traffic industrial areas.
VersaTek ensures a clear finish with a mild solvent odor. Like all
Spartan Epoxies products, we proudly manufacturer in the USA,
VersaTek is the choice for durable and aesthetic surface protection.
MIXING INSTRUCTIONS: Prepare only the quantity of material
that can be applied within an hour at 73°F, as higher temperatures
shorten pot life. Mix at a 2:1 ratio of Part A to Part B, ensuring precise
measurement. Mix thoroughly for 45 seconds with a low-speed
drill, pour into clean pail (transfer pail), mix for 15 seconds. Keep the
mixture free from moisture.
APPLICATION BARE CONCRETE: VersaTek can be applied using a
brush, roller, or airless sprayer. For rolling, opt for a 3/16” high quality
roller cover, utilizing a dip and roll technique from a 5-gallon pail
or roller pan. Apply the material evenly, DO NOT directly pour onto
the surface. Due to quick drying, apply generously in small sections,
aiming for a coverage rate of 250-350 sq ft per gallon. Avoid over-
application or puddling to prevent solvent entrapment. Do not use
solvent acrylic sealers as a primer.
FULL BROADCAST FLAKE: Less textured flake, use swing buffer to
sand flakes flat. Vac clean, wipe with acetone. Dip and roll at 500
FT2 / gallon. Full texture - no sanding - 320 FT2 1st coat, 500 FT2 2nd
finishing coat.
METALLIC EPOXY, PARTIAL FLAKE, OR NEAT: Dip and roll liberally,
use W pattern, a second person should wear spikes and use a 3/16”
nap roller cover to backroll, apply @ a rate of 400 FT2 per gallon. A
2nd coat is not necessary, however you can apply at a rate of 600 FT2
per gallon.
RECOATING GUIDELINES: VersaTek allows for an indefinite window
for recoating of itself. For different product, degloss with a floor
machine or by hand using 120 grit screen. For best results, apply on
a sample board to achieve desired finish