Fall Harvest Sale – Ends 11/08/24! Call or chat today! Large Project? Request a Quote.

UltraCoat™ 100% Solids Epoxy - 1 Gallon Kit

UltraCoat™, a technologically advanced LOW VOC, 100% solids epoxy formulation, engineered for multifaceted applications. Adding metallic pigments, it produces intricate 3D effects. Designed for versatility, mix in our color packs to achieve a so ...
  • $99.99

UltraCoat™, a technologically advanced LOW VOC, 100% solids epoxy formulation, engineered for multifaceted applications. Adding metallic pigments, it produces intricate 3D effects. Designed for versatility, mix in our color packs to achieve a solid color epoxy. Which enables the user to broadcast flakes, quartz, sand or micas. Finally, only one product to keep on hand. Its robust composition guarantees superior adhesion, long-lasting durability, and outstanding visual outcomes across a spectrum of commercial and residential requirements. Prepare concrete by etching or grinding.  Fill expansion joints with our JS100. Repair / fill cracks with CF100. Wood substrate? Use FLEX epoxy system which enables any system to be applied over a wooden substrate. 

Coverage Rate: 50 - 150 sq ft per gallon @ 30 to 10 mils. Standard coverage rate for a flake system is 133 sq ft per gallon. Metallic Epoxy can be applied at a rate of 50 to 70 sq ft per gallon.

CURE SCHEDULE (50° to 90°F and 50% relative humidity)  

Pot Life: 3 to 5 mins 
Recoat: 18 to 24 hours 
Working Time: 60 mins 
Vehicle Traffic: 4 to 5 days 
Lt. Foot Traffic: 18 to 24 hours 
Full Cure: 5 to 8 days 
Metallic Pigments or Pigment Packs: Saturate Part A with metallics or our color packs the day primer is applied. Add gradually, slowly mix using a paint stick or mixer. Replace lid, let rest overnight or min 3 hrs. 

Mixing: Pour Part B down the center of Part A, mix slowly for 2 minutes with a mechanical mixer or a paint stick. Avoid air entrapment. Once streak free, transfer to a clean pail and remix slowly for 30 - 45 seconds. Avoid improper mixing to prevent product failure. Material is ready to pour. Do not let mixed epoxy sit in the bucket. POUR OUT IMMEDIATELY. Wear spiked shoes to apply high build epoxies. Prior to topcoating Metallic or Neat epoxy, degloss with 120 grit non-directional screen, vacuum clean, wipe down with isopropyl alcohol (IPA). 

Metallic Application: Pour a 12” ribbon along the furthest wall. Use a wide smoothing trowell to spread the Metallic Epoxy. You can swirl with a 3/16” nap roller to achieve marbled effects or to remove squeegee marks. Tip: Keep handle of smoother trowell low to avoid squeegee marks. 
Broadcast or a Neat System: Pour a 12” ribbon along the furthest wall. Spread using a 3/16” notched squeegee, back roll with a 3/16” nap roller, broadcast flakes, quartz, micas or other approved aggregate. Neat application skip broadcasting. 

USDA / FDA APPROVED: Acceptable for use in floors subject to USDA / FDA inspections and regulations.
  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over UltraCoat™ 100% Solids Epoxy - 1 Gallon Kit

Total Reviews (0)
click here write review to add review for this product.