--930x1180.jpg)
AquaTek - Low VOC Waterbased Urethane
AquaTek is a low VOC, 2 part, high-performance, water-borne
urethane designed for versatility across a range of applications.
Available in gloss or matte finishes, ensuring superior protection
against UV rays, chemicals, and has excellent abrasion ...
-
$0.00
Available Options
VIDEO AND INSTRUCTIONS
Videos and Instructions
EXPERT HELP
FREQUENTLY ASKED QUESTIONS
DURABLE
Large Project? Get a Quote Here
AquaTek is a low VOC, 2 part, high-performance, water-borne
urethane designed for versatility across a range of applications.
Available in gloss or matte finishes, ensuring superior protection
against UV rays, chemicals, and has excellent abrasion
resistance. Ideal for both interior and exterior applications,
AquaTek is suitable for industrial facilities, refineries, storage
tank exteriors, power industry, amusement parks, wastewater
facilities and even residential spaces. Apply over properly
prepared concrete. Can also be used as a topcoat for many of
our epoxy systems. AquaTek is a perfect companion for our
Decorative Flake system and provides excellent hot-tire pickup
resistance. Read TDS for more information.
COVERAGE: 450 - 550 sq ft per gallon
MIXING: Mix Part A with a low-speed drill and mixer for 2
mins. Incorporate Part B, continuing to mix for another 2 mins.
Prepare only the quantity that can be used within product’s
pot life of 1.5 hours (varies with air and surface temps). Avoid
introducing air into the mixture. Rest for 3-4 minutes to induce,
then proceed with application promptly.
APPLICATION: For floors use a 3/16” nap roller; for verticals, a 1”
nap. Apply thin layers, ensuring no more than 24 hours between
coats. Regulate the amount with a paint tray.
If 24 hours pass before re-coating, lightly degloss the coating
using 120 grit non-directional screen. Vaccum clean, spray
acetone, quickly wipe.
*Conduct a test on a concealed section to verify compatibility
and coverage, as concrete porosity, density, and texture may
affect outcomes.
CLEAN-UP: Clean-up with water, then solvent (e.g., xylene)
immediately after use. Wipe up spills while wet using xylene.