SD70 - Anti-Static Urethane
SD70 Anti-Static Urethane is a two component aliphatic polyurethane floor coating that exhibits excellent characteristics for abrasion, chemical resistance, flexibility, weathering, UV stability and static dissipative properties. The electro conducti ...
-
$0.00
Customise your product
Available Options
VIDEO AND INSTRUCTIONS
Videos and Instructions
EXPERT HELP
FREQUENTLY ASKED QUESTIONS
DURABLE
Large Project? Get a Quote Here
SD70 Anti-Static Urethane is a two component aliphatic polyurethane floor coating that exhibits excellent characteristics for abrasion, chemical resistance, flexibility, weathering, UV stability and static dissipative properties. The electro conductive powders used will not slough off or abrade and retain their conductive properties regardless of temperature, and unlike Ionics, the performance is independent of humidity so it is ideal for any environment.
RECOMMENDED FOR: Recommended for computer rooms, laboratories, aircraft hangers, exterior tanks, indoor or outdoor service and chemical exposure areas with regard to concrete, cement, brick, masonry or metal. This product will help reduce static buildup not attainable from an unmodified urethane.
STANDARD COLORS:
light gray, medium gray, and tile red
REQUIRED FILM THICKNESS:
3-5 mils per coat wet thickness (yields 2-3 mils dry)
COVERAGE PER GALLON:
320 to 500 square feet @ 3-5 mils wet thickness
THIS PRODUCT IS NOT FOR A CONDUCTIVE COATING SYSTEM. THIS SYSTEM IS NOT INTENDED FOR AREAS EXPOSED TO EXPLOSIVE MEDIA SUCH AS AMMUNITION PLANTS. THIS MATERIAL IS PROVIDED AS A STATIC DISSIPATIVE COATING. REVIEW THE DATA ON THE FRONT SIDE OF THIS TECHNICAL DATA UNDER ELECTRICAL RESISTANCE FOR TESTING RESULTS. REVIEW YOUR ELECTRICAL RESISTANTCE REQUIREMENTS BEFORE INSTALLING THIS PRODUCT. DO NOT USE WAXES UNLESS THEY ARE SPECIFICALLY FORMULATED AND RECOMMENDED FOR ANTI STATIC APPLICATIONS. ALWAYS APPLY TEST PATCHES OF YOUR SELECTION TO CHECK CONDUCTIVITY PRIOR TO APPLICATION AND TO BECOME FAMILIAR WITH THE PRODUCTS APPLICATION PROCEDURE.
RECOMMENDED FOR: Recommended for computer rooms, laboratories, aircraft hangers, exterior tanks, indoor or outdoor service and chemical exposure areas with regard to concrete, cement, brick, masonry or metal. This product will help reduce static buildup not attainable from an unmodified urethane.
light gray, medium gray, and tile red
REQUIRED FILM THICKNESS:
3-5 mils per coat wet thickness (yields 2-3 mils dry)
COVERAGE PER GALLON:
320 to 500 square feet @ 3-5 mils wet thickness