SD100 - Static Dissipating High Build Epoxy - Quick Set

SD100  - Static Dissipating High Build Epoxy - Quick Set is a superior static dissipating, high build epoxy, distinguished by its quick-set feature, brought to you by Spartan Epoxies. When synchronized with an apt primer, it ensures excellent abrasion and chemical resistance, coupled with top-notch static dissipative properties. The electro-conductive elements integrated are steadfast, maintaining their conductive capabilities regardless of fluctuations in temperature. Notably, the performance of SD100 is consistent and is not influenced by humidity, contrasting with Ionics.

RECOMMENDED FOR: SD100 - Static Dissipating High Build Epoxy - Quick Set is particularly suited for specialized environments such as computer rooms, laboratories, hospitals, chemical plants, and solvent storage facilities. It exhibits exceptional adaptability and efficacy on a variety of substrates including concrete, cement, masonry, and metal.

SD100 epitomizes the commitment of Spartan Epoxies to deliver innovative solutions with enduring quality and reliability. The meticulous formulation of this high build epoxy ensures the prolonged retention of conductive properties, offering consistent and advanced static dissipative solutions in a plethora of conditions and applications. The quick-set feature of SD100 amplifies its appeal by ensuring rapid application and curing, enhancing the user experience and operational efficiency.

SOLIDS BY WEIGHT: 98% (+/- 1%)

SOLIDS BY VOLUME: 97% (+/- 1%)

VOLATILE ORGANIC CONTENT: Less than 31 g/l (mixed)

STANDARD COLOR: Medium gray

RECOMMENDED FILM THICKNESS: Apply at 25 mils wet thickness. (Do not apply thicker than 30 mils or less than 20 mils)

COVERAGE PER GALLON: 64 square feet per gallon @ 25 mils

PACKAGING INFORMATION: 3 gallon and 15 gallon kits (volumes approximate)

MIX RATIO: 10.9 pounds (1 gallon) part A to 5.0 pounds (0.50 gallons) part B (volumes approx) (standard colors) Other colors will vary by weight.

SHELF LIFE: ½ year in unopened containers

FLEXURAL STRENGTH: 12,400 psi @ ASTM D790

COMPRESSIVE STRENGTH: 10,600 psi @ ASTM D695

TENSILE STRENGTH: 8,100 psi @ ASTM D638

ADHESION: 350 psi @ elcometer (concrete failure, no delamination)

FINISH CHARACTERISTICS: Gloss (>50 at 60 degrees @ glossmeter)

HARDNESS: Shore D= 75

GARDNER VARIABLE IMPACTOR: 50 inch pounds direct – passed

ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 20 mg loss

VISCOSITY: Mixed = 1,000-2,000 cps (Typical, most colors)

DOT CLASSIFICATIONS: Part A “not regulated” Part B “CORROSIVE LIQUID N.O.S., 8, UN1760, PGIII”

APPLICATION TEMPERATURE: 50-90 degrees F with relative humidity below 85%

PRIMER: Recommended CP51 black.

TOPCOAT: None recommended