Cove PRO Epoxy Mortar

Cove PRO is a three component 100% solids epoxy mortar designed for cove base surface applications. This product has specially selected aggregate and ingredients to provide easy construction of cove bases with the use of a marginal trowel or other cove base application tools. Recommended for any type of cove base applications. NOT RECOMMENDED FOR: Immersion applications for all acids and chemicals.

PACKAGING AND COVERAGE INFORMATION 

Sample Unit = 7 Linear Feet for a 4" High Cove - Contains an estimated Pint of Part A and 1/2 Pint of Part B of liquids + 6.2lbs of Sand (Aggregate) all together in a gallon can.

1/2 unit = 14 Linear Feet for a 4" High Cove - Contains an estimated Quart of Part A and a Pint of Part B of liquids + 13.5lbs of Sand (Aggregate).

1 Unit = 29 Linear Feet for a 4" High Cove - Contains an estimated 3/4 Gallon Kit of Liquids + 27lbs of Sand (Aggregate).

LIQUIDS ONLY AGGREGATE NEEDED

1 Gallon Liquids Only Kit: 36lbs of Aggregate Needed. 

3 Gallon Liquids Only Kits: 108 lbs of Aggregate Needed.

5 Gallon Liquids Only Kits: 180 lbs of Aggregate Needed.

SOLIDS BY WEIGHT: 100% 

VOLATILE ORGANIC CONTENT: Less than 1 g/L STANDARD COLORS: Natural, Light Gray, Dark Gray, and Red 

RECOMMENDED FILM THICKNESS: As needed to form the cove base with a 1/8” minimum 

COVERAGE PER GALLON:  Depends on style or type of cove base applied 

UNIT= 4.25# part A, 1.9# part B, 26.5# aggregate.(weights are approximate)
MIX RATIO: UNIT= .45 gallons part A to .23 gallons part B plus 26 .5# aggregate (weights and volumes approximate)
SHELF LIFE: 1 year in unopened containers
FLEXURAL STRENGTH: 15,000 psi @ ASTM D790
COMPRESSIVE STRENGTH: 14,575 psi @ ASTM D695
TENSILE STRENGTH: 9,200 psi @ ASTM D638
ULTIMATE ELONGATION: 3.1%
IMPACT RESISTANCE: Excellent
ABRASION RESISTANCE: Excellent
HEAT DEFLECTION TEMP: 62.25 degrees C @ ASTM D648
WEATHERING: Good (chalks)
VISCOSITY: Part A: 2,200-2,700 cps, Part B= 200-300 cps
DOT CLASSIFICATIONS: Part A&C “not regulated”
Part B “CORROSIVE LIQUID N.O.S., 8, UN1760, PGIII” 

PRIMER: None required, however, in some applications a primer can aid in application. Ask a Spartan Epoxies consultant for more information.
TOPCOAT: None required