ACCEL93 - 15 Gallon Kit

ACCEL93 is a two component 93% solids colored epoxy coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete. ACCEL93 has good low temperature cure capabilities down to as low as 45°F. However, ACCEL93 only has fair color stability and should be top coated with an aliphatic urethane when long term color stability is a requirement. 

Recommended for Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environments..

Packaging Information: (2) 5 Gallon Buckets of Part A, and (1) 5 Gallon Bucket of Part B 

Available in 3 Gallon Cradle Kits  
Cradle Kits / Batch Kits are the installers choice for faster mixing, and job turnaround time. 2 Gallons of Part A is at the bottom and 1 Gallon Part B is cradled inside (Batch kits are essentially the same but you will get the 3 gallon kit in a box, with Part B outside of the bucket.). 

Cure Schedule: @70 F degrees

Pot life – 150 gram mass …….……….…………...26-38 minutes

tack free (dry to touch)…………...…………...……...…..4.5- 6.0 hours

recoat or topcoat.....……………...…........................................ 7-9 hours

light foot traffic...………………………………......………..8-12 hours

full cure (heavy traffic)... ……………..…………...…...….......2-5 days

This 15 Gallon kit will cover: 

1995 sq ft @ 12 mils  

4005 @ 6 mils  

Per Gallon:

133-267 sq ft/gal @ 6-12 mils  

Cure Schedule: 70 degrees: 
Pot Life - 1.5 gallon volume: 35 to 55 mins
Tack Free (dry to touch): 6 to 9 hours
Recoat / Topcoat: 10 to 14 hours 
Light Foot Traffic: 12 to 16 hours 
Full Cure: 2 to 7 days

Application Temperature:
45 - 90 Degrees F with relative humidity below 85% for best results.