ACCEL100 - 3/4 Gallon Kit

ACCEL100 - 3/4 Gallon Kit will cover 99.5 sq ft @ 12 mils (133 sq ft per gallon) and 200 sq ft @ 6 mils (267 sq ft per gallon). ACCEL100 is a two component 93% solids colored epoxy coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete. ACCEL100 has good low temperature cure capabilities down to as low as 45°F. However, ACCEL100 only has fair color stability we and should be top coated with an aliphatic urethane when long term color stability is a requirement. 

Recommended for Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environments..

Packaging Information: 1 Gallon Part A and a 1/2 Gallon Part B.

Cure Schedule

Pot life – 150 gram mass …….……….…………...26-38 minutes

tack free (dry to touch)…………...…………...……...…..4.5- 6.0 hours

recoat or topcoat.....……………...…........................................ 7-9 hours

light foot traffic...………………………………......………..8-12 hours

full cure (heavy traffic)... ……………..…………...…...….......2-5 days

This 3/4 Gallon kit will cover: 

99.5 sq ft @ 12 mils  

200 @ 6 mils  

Per Gallon:

133-267 sq ft/gal @ 6-12 mils  

Cure Schedule: 70 degrees: 
Pot Life - 1.5 gallon volume: 35 to 55 mins
Tack Free (dry to touch): 6 to 9 hours
Recoat / Topcoat: 10 to 14 hours 
Light Foot Traffic: 12 to 16 hours 
Full Cure: 2 to 7 days

Application Temperature:
45 - 90 Degrees F with relative humidity below 85% for best results.